Amplificador Emotiva XPA- 2 GEN 3

Emotiva

Amplificador Emotiva XPA- 2 GEN 3

Emotiva Audio Corporation

Amplificador audiófilo de poder de dos canales.

Emotiva presenta este equipo que entrega un rango dinámico masivo con la precisa suavidad de un amplificador de baja distorsión. Construido sobre una estructura modular completamente permite al usuario mantenerse actualizado a nivel de componentes y también ampliar si así se desea la cantidad de canales.

 

Diseñado para suplir el deseo de cualquier oyente este amplificador entrega 300 watts/canal RMS a 8 Ohmios; dos canales manejados | 490 watts/canal RMS a 4 Ohmios; dos canales manejados. Así como, entradas balanceadas y sin balancear para tener mayor compatibilidad con pre amplificadores y procesadores del mercado.

Audio Specifications (Two High-Powered Single Channel Modules):

  • Power Output:

  • 300 watts RMS/channel; 20 Hz – 20 kHz; THD<0.1%; 8 Ohms; one channel driven.

  • 550 watts RMS/channel; 20 Hz – 20 kHz; THD<0.2%; 4 Ohms; one channel driven.

  • 300 watts RMS/channel; THD<0.1%; 8 Ohms; two channels driven.

  • 490 watts RMS/channel; THD<0.1%; 4 Ohms; two channels driven.

  • Power Bandwidth (at rated power; 8 Ohm load): 20 Hz to 20 kHz (+ / – 0.1 dB).

  • Broad Band Frequency Response: 5 Hz to 80 kHz +0/-2 dB.

  • THD + noise: < 0.005%; at 100 watts RMS; 1 kHz; 8 Ohms.

  • Signal to Noise Ratio (8 Ohm load):

  • > 117 dB; ref FTC rated power; unbalanced input (A-weighted).

  • > 91 dB; ref 1 watt; unbalanced input (A-weighted).

  • Minimum Recommended Load Impedance (per channel): 4 Ohms

  • (which equals one 4 Ohm load or two paralleled 8 Ohm loads).

  • Damping Factor (8 Ohm load): > 500.

  • Input Sensitivity (for rated power; 8 Ohm load): 1.5 V.

  • Gain: 29 dB.

  • Input Impedance:

  • 33 kOhms (balanced).

  • 23.5 kOhms (unbalanced).

Input And Output Connections

  • Input Connections (High-Powered Single Channel Modules):

  • Unbalanced (RCA); balanced (XLR); one each per channel, independently selectable.

  • Input Connections (Stereo Modules):

  • 2 Unbalanced (RCA); 2 balanced (XLR); two per channel, independently selectable.

  • Speaker Output Connections: Audiophile grade, gold plated, 5-way binding posts.

  • Trigger:

  • Trigger Input: 5 – 12 V (AC or DC); <10 mA input current required.

  • Trigger Output: 12 VDC; can drive any load up to 120 mA.

Power Requirements

  • Between 100 VAC and 250 VAC @ 50 / 60 Hz (automatically detected).

Front Panel Controls and Indicators

  • Standby: push button (halo ring changes color to indicate Standby or On).

  • Status LEDs: one per channel; blue.

  • Status LEDs change to red to indicate a fault condition.

Rear Panel Controls

  • AC Power switch: rocker switch (switches AC main power).

  • Status LEDs switch: disables front panel Status LEDs and dims Standby button halo.

  • Input selector switches (one per channel):

  • metal toggle switches; select between balanced and unbalanced inputs.

  • Circuit Breaker: press button to reset circuit breaker.

$3.795.000